Usage Advise On Using Procare’s Disc Cleaner And Reconditioner


Motor maintenance

There are two possible scenarios strongly suggested not to follow as it can significantly reduce the lifespan of the motor within the product.

First, is the excessive heat build up with continuous operation of the device.

Second, is placing too much fluid onto the pads, which can create too much friction for the motor to work on.

The important point here about taking care of the motor is to reduce the possibility of overheat and the subsequent result of motor or gear failure.

If there is quite a few disc that require cleaning or repairing, recommend to take a beak for every 15 minutes of continuous of operation to let the motor heat dissipate. Recommend following liquid placement instructions as per manual so as to not overwork the motor.